The orange color appearing on the Status light of the Arlo security camera is a sign that the camera is not connected to the internet properly. It sometimes can result in the non-functionality of the camera which can further make you land up in issues like Arlo camera not recording.
As you can see that the appearance of the orange light on the camera is the root cause of various issues, you are supposed to address it as soon as possible. Mentioned in this very write-up are the solutions that you are supposed to follow in case you are facing the same problem.
Page Contents
Solutions: Arlo Camera Blinking Orange
The very first thing you need to do before implementing any other troubleshooting hack is that you have to reboot the camera. If you have a wired camera simply disconnect its power cord for 10 seconds and connect it back. On the off-chance your camera runs through a battery, you can try rebooting by removing the batteries from the battery compartment of the camera and connecting them back after a while. If you fail, the tips given here will be your savior.
I. Sync the Camera and Base Station
As the orange light appears when the camera is not connected to the internet, it directly indicates that you need to connect the camera and the base station or router. Therefore, you must do the needful without any delay. You can sync the camera and base station by pressing their respective Sync buttons. However, you need to go through the process of accessing the Arlo login page in case you are an owner of a router.
It is up to you whether you want to connect the router and Arlo camera using the Arlo app or the login web GUI. Whatever method you opt for, just make sure that the device used for connecting the camera and router must be connected to the router’s 2.4 GHz network only. This is because Arlo cameras operate on the same frequency.
II. Bring the Camera in WiFi Range
The orange light on the camera and the internet connectivity problem means that it is too far from the router or Base Station. Thus, the next thing you should be doing in order to get rid of the orange light on the Arlo camera is to reduce their gap by any means. To do that, it would be better if you relocate your Base Station or the main router. Just make sure that these devices are not present far from their host devices.
Also, make sure that the Ethernet or power cables used in the network system are in working states. Using damaged cables won’t do the job for you. Loose cable connections must be eliminated and replaced in every case.
III. Get the WiFi Interference Removed
If there is too much WiFi interference present between the path of communication of the router/base station and your Arlo security camera, then also the orange light shows up. So, you must pay attention to such objects or devices and change their locations. If you do not know what these objects or devices are, then let us brief them for you.
You must keep your camera and router away from devices that emit electromagnetic waves (televisions, refrigerators, microwave ovens, etc.), objects that contain a large amount of water, and reflexive surfaces. Your camera must not be aiming through a glass window. To know about the location parameters, you can go to myarlo page and see where the camera must be placed.
The Final Words
This was all about fixing the orange light on the Arlo camera. It is expected that the aforementioned tips will help you get the issue resolved. In case, you fail to do that, resetting the camera and re-installing it using the Arlo app will be good for you.
