BrosTrend range extenders are supposed to be the solutions to all kinds of WiFi speed related problems. But, situations are quite opposite when the WiFi extender itself causes problems right after completing the BrosTrend WiFi extender setup. If your WiFi extender is also giving you some kind of problems, this is the most reliable post you should read. Here, we will share some tips that are universally applicable. You can use them depending upon your access to various factors.
Page Contents
Troubleshooting: BrosTrend WiFi Extender Causing Problems
Given below are the techniques that you must follow if you are facing issues making the most of the home network created by your BrosTrend WiFi range extender:
Restart the Extender:
No matter what kind of problem your BrosTrend WiFi extender is giving you, you must always reboot the extender at the beginning of the troubleshooting process. It not only gives a fresh start to the extender and catalyzes the troubleshooting, but also fixes network errors that are most likely to show up at any time and cause performance-related issues.
Place the BrosTrend Extender Properly:
The placement of a range extender has a major role to play when it comes to extracting the best output. May be your extender is causing problems because it hasn’t been assigned that so called perfect position. So, you should check the surrounding of the extender and see if there is any electromagnetic wave emitting device present. Apart from this, look for a reflexive surface plus an object containing a large amount of water too. If there is any such factor present, you are suggested to change the location of your BrosTrend device.
Update the Firmware:
Your BrosTrend WiFi range extender is not very much different from other networking devices. It also needs to be updated. This is to inform you that you have to update the extender if you want it to work well always. You can do it by accessing the web GUI of the range extender using the default address re.brostrend.com. Know that the default web address remains the same despite the fact that you have performed BrosTrend AC1200 Setup or have installed another range extender model brought in by the same company.
Ensure Proper Distance from Router:
The distance between your BrosTrend WiFi range extender and the main/root router holds a great importance. The more the distance between both devices, the more the frequency of the problems given by the range extender. Therefore, you should aim to reduce this gap. But, does it mean that you can now place your devices very close? Of course not! This is because if you place your devices very close, then the chances of their signals getting involved in a clash increases. Keeping them at a distance of 8 to 10 ft will be great. However, this distance can be varied depending upon the number of physical obstructions present in the path of communication between the extender and router.
Use Hardwired Connections Wherever Possible:
You cannot deny the fact that wired connections are more secure and reliable than the wireless ones. The reason being, no one can steal the data transmitted via cables and as there is no interruption, the signal flow easily from one device to another. So, you are suggested to connect your devices using an Ethernet cable whenever possible. This will also reduce the WiFi network traffic resulting in even distribution of signals and speed.
The Final Words
We are now about to wrap up the guide that explained how to troubleshoot when the WiFi extender causes problems. We hope that using the given data, you will be able to make the most of your device. Thanks for reading the post!
